Ingenico iCT250 technical Manual


These instructions will guide you through the proper steps to properly initialize your Moneris terminal.

From the READY screen:

1. Press the (#) key.
The MAIN MENU appears.

2. Scroll down to CONFIGURATION, and press the (Green Button) key.
The CONFIG FUNCS menu appears.


3. Press the (Green Button) key to select INITIALIZATION.

If the SWIPE ADMIN CARD prompt appears instead, swipe the POS Admin card.

If the RETAIN CURRENT MERCH SETTINGS? prompt appears, press the (Top Left “–“ button) key to select YES.
IMPORTANT: DO NOT select NO unless instructed to do so by a Moneris Service Centre representative.

If the MERCHANT ID entry screen appears, press the (Green Button) key.

If the PHONE NUMBER entry screen appears, press the (Green Button) key.

4. Please wait while the terminal communicates with the Moneris Host. This may take a few minutes. (If attached, the external PINpad displays WELCOME/BONJOUR during the Re-initialization.

moneris-initialization-ingenico-ict250 moneris-ingenico-initialization

Ingenico 5100 terminal Manual

Ingenico ict220 hack

Ingenico POS Manual

Ingenico i6780 manual

Ingenico ict250 key injection